| 序号 | 标准修订信息 |
1 | A606/A606M - Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance has been revised to A606/A606M-18 developed by Committee A01.19, ASTM BOS Volume 01.03. |
| 2 | A690/A690M - Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments has been reapproved, available as A690/A690M-13a(2018) developed by Committee A01.02, ASTM BOS Volume 01.04. |
| 3 | B856 - Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS) has been revised to B856-18 developed by Committee B01.07, ASTM BOS Volume 02.03 |
| 4 | B857 - Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW) has been revised to B857-18 developed by Committee B01.07, ASTM BOS Volume 02.03. |
| 5 | D1193 - Standard Specification for Reagent Water has been reapproved, available as D1193-06(2018) developed by Committee D19.02, ASTM BOS Volume 11.01. |
| 6 | A1016/A1016M - Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes has been revised to A1016/A1016M-18 developed by Committee A01.10, ASTM BOS Volume 01.01 |
| 7 | D664 - Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration has been revised to D664-17a developed by Committee D02.06, ASTM BOS Volume 05.01. |
| 8 | F2851 - Standard Practice for UAS Registration and Marking (Excluding Small Unmanned Aircraft Systems) has been reapproved, available as F2851-10(2018) developed by Committee F38.01, ASTM BOS Volume 15.11. |
| 9 | B249/B249M - Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings has been revised to B249/B249M-18 developed by Committee B05.02, ASTM BOS Volume 02.01. |
| 10 | E119 - Standard Test Methods for Fire Tests of Building Construction and Materials has been revised to E119-18 developed by Committee E05.11, ASTM BOS Volume 04.07. |
| 11 | F1330 - Standard Guide for Metallic Abrasive Blasting to Descale the Interior of Pipe has been reapproved, available as F1330-91(2018) developed by Committee F25.11, ASTM BOS Volume 01.07. |
| 12 | D6467 - Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils has been editorially changed, available as D6467-13e1 developed by Committee D18.05, ASTM BOS Volume 04.09. |
| 13 | D5093 - Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring has been editorially changed, available as D5093-15e1 developed by Committee D18.04, ASTM BOS Volume 04.08. |
| 14 | B351/B351M - Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application has been reapproved, available as B351/B351M-13(2018) developed by Committee B10.02, ASTM BOS Volume 02.04 |
| 15 | D6138 - Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test) has been revised to D6138-18 developed by Committee D02.G0.06, ASTM BOS Volume 05.03 |
| 16 | C240 - Standard Test Methods for Testing Cellular Glass Insulation Block has been revised to C240-18 developed by Committee C16.32, ASTM BOS Volume 04.06. |
| 17 | D7038 - Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants has been revised to D7038-18 developed by Committee D02.B0, ASTM BOS Volume 05.04. |
| 18 | B466/B466M - Standard Specification for Seamless Copper-Nickel Pipe and Tube has been revised to B466/B466M-18 developed by Committee B05.04, ASTM BOS Volume 02.01 |
| 19 | A106/A106M - Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service has been revised to A106/A106M-18 developed by Committee A01.09, ASTM BOS Volume 01.01. |
| 20 | E1012 - Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application has been editorially changed, available as E1012-14e1 developed by Committee E28.01, ASTM BOS Volume 03.01. |
| 21 | E1269 - Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry has been reapproved, available as E1269-11(2018) developed by Committee E37.01, ASTM BOS Volume 14.05. |
| 22 | A890/A890M - Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application has been revised to A890/A890M-18 developed by Committee A01.18, ASTM BOS Volume 01.02. |
| 23 | B85/B85M - Standard Specification for Aluminum-Alloy Die Castings has been revised to B85/B85M-18 developed by Committee B07.01, ASTM BOS Volume 02.02. |
| 24 | A473 - Standard Specification for Stainless Steel Forgings has been revised to A473-18 developed by Committee A01.06, ASTM BOS Volume 01.05. |
| 25 | B94 - Standard Specification for Magnesium-Alloy Die Castings has been revised to B94-18 developed by Committee B07.04, ASTM BOS Volume 02.02. |
| 26 | F2247 - Standard Test Method for Metal Doors Used in Blast Resistant Applications (Equivalent Static Load Method) has been revised to F2247-18 developed by Committee F12.10, ASTM BOS Volume 15.08. |
| 27 | B179 - Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes has been revised to B179-18 developed by Committee B07.01, ASTM BOS Volume 02.02. |
| 28 | B391 - Standard Specification for Niobium and Niobium Alloy Ingots has been reinstated as B391-18 developed by Committee B10.03, ASTM BOS Volume 02.04. |
| 29 | E350 - Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron has been revised to E350-18 developed by Committee E01.01, ASTM BOS Volume 03.05. |
| 30 | G150 - Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels and Related Alloys has been revised (with title change) to G150-18 developed by Committee G01.11, ASTM BOS Volume 03.02. |
| 31 | A350/A350M - Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components has been revised to A350/A350M-18 developed by Committee A01.22, ASTM BOS Volume 01.01. |
| 32 | E1019 - Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques has been revised (with title change) to E1019-18 developed by Committee E01.01, ASTM BOS Volume 03.05. |
| 33 | C836/C836M - Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course has been revised to C836/C836M-18 developed by Committee D08.22, ASTM BOS Volume 04.04 |
| 34 | A638/A638M - Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service has been reapproved (with editorial change), available as A638/A638M-10(2018)e1 developed by Committee A01.17, ASTM BOS Volume 01.03. |
| 35 | G148 - Standard Practice for Evaluation of Hydrogen Uptake, Permeation, and Transport in Metals by an Electrochemical Technique has been reapproved, available as G148-97(2018) developed by Committee G01.11, ASTM BOS Volume 03.02 |
| 36 | G61 - Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys has been reapproved, available as G61-86(2018) developed by Committee G01.11, ASTM BOS Volume 03.02. |
| 37 | G96 - Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods) has been reapproved, available as G96-90(2018) developed by Committee G01.11, ASTM BOS Volume 03.02. |
| 38 | E768 - Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel has been reapproved, available as E768-99(2018) developed by Committee E04.01, ASTM BOS Volume 03.01. |
